Day: November 5, 2021

When you think of concrete, it’s likely not long before you’re thinking about its durability. It’s one of the more well-known advantages of the material. And it’s why many choose to use concrete in construction. After all, no one wants to build with a material that couldn’t withstand the outside elements. So we turn to that concrete durability, relying on it enough to make concrete one of the most consumed materials on the planet, second only to water.

But concrete isn’t invulnerable. Depending on its mix, you could have a maintenance liability on your hands. Luckily, there is a way to avoid that. All it takes is being aware of how you can convert your concrete slab from a maintenance liability to an asset.

Keep in Mind That Slabs Can Be Prone to Wear and Tear

The first step in the right direction is to remind yourself that while durable, concrete slabs can still be prone to wear and tear.

It’s why you look for concrete hardening products. They’re meant to add an extra layer of protection to the concrete’s surface, sheltering it from abrasive and erosive forces that might otherwise degrade the concrete.

You can probably think of quite a few culprits responsible for this wear and tear. But as a refresher, let’s look into the specific types of abrasion and erosion you’re likely protecting your concrete from.

Number of Abrasive Forces Can Cause This

As noted in our latest e-book (which you can download and check out for yourself here), there are three specific types of abrasion-only wear:

Sliding abrasion — Also known as two-body abrasion, it’s what happens when a hard object slides across concrete. As it moves, the hard object will begin to gradually bore into the concrete, removing a bit of its surface each time. So if you have skids or some other item with a hard material moving back and forth over your concrete frequently, you’ll start to notice a rut in its surface.

 

Foreign particle abrasion — For any concrete projects that deal with vehicles, you’re sure to come across foreign particle abrasion. That’s because as the vehicles travel over the concrete, hard particles get trapped between the vehicle tires and concrete surface, and that wears down both materials simultaneously.

 

Rolling abrasion — A common sight in industrial spaces, rolling abrasion is what happens when wheels under a heavy load roll over a concrete surface. These wheels might come from carts, forklifts, or other wheeled equipment. But whichever one it is, over time, their movement over the concrete surface wears that surface out and creates noticeable dips in the concrete.

Erosive Forces Can Also Cause Similar Damage

One of the more common types of erosive wear is actually a combination of abrasion and erosion. And it’s often seen in hydraulic projects.

Why?

Well, these projects are typically ones that are surrounded by fast-moving water, such as dams and spillways. So they are more likely to encounter the abrasive effect of debris in the water grinding against their concrete surfaces. This debris might come in the form of silt, sand, gravel, rocks, or even ice. And while it’s roughing up the surface of the concrete, the surrounding water rushing by is gradually causing the concrete to erode.

That Can Open the Door to Various Costly Risks

If either abrasion or erosion starts to seriously affect your concrete to the point that you can see the damage, it can create a safety hazard, disrupt operations, and increase maintenance costs.

For Floor Slabs, That Can Involve an Increased Danger of Slipping, Tripping, and Falling

All those dips and ruts in concrete flooring caused by abrasive wear? They can pose a threat to your team’s personal safety.

While for a time, you might be able to work around the uneven flooring, you or someone else on your team is inevitably going to slip, trip, or fall. In fact, it’d be close to a statistical anomaly if you didn’t! Slips, trips, and falls make up a third of lost-workday injuries according to the Centers for Disease Control and Prevention. And as EHS Today notes, the primary cause for more than half of these injuries is due to an issue with a walking surface. So you can imagine the risk you take with keeping that uneven floor!

The cost of not implementing preventative measures for this kind of risk for businesses in the United States of America (USA) alone is about $70 billion a year overall in compensation and medical fees for workers.

For Road Slabs, That Means Traffic Accidents

Similar to how uneven flooring can pose a risk to people walking over it, uneven roads can be a risk to those driving.

Initially, that unevenness might be a slight difference in road surface from all that foreign particle abrasion. But eventually, that slight dip might lead to potholes or a fully uneven road. It also increases tire wear, making the vehicles on the road less efficient and safe to use.

All of which increases the risk for roadway accidents. Potholes on their own cause around $3 billion in vehicular repairs annually in the USA. And in Canada, each year, the cost for drivers as a whole is increasing by that same amount because of increased vehicular repairs and maintenance and general vehicular damage due to poorly maintained roads.

Hazards like potholes pose an even greater risk for those on motorcycles and bikes.

Those on motorcycles, according to the Motorcycle Safety Foundation, may crash when encountering potholes. That can be a significant concern as motorcycle incidents have a 29% higher fatality risk than ones that occur with automobiles and light trucks.

For cyclists, they can end up with permanent nerve damage. But that’s not the worst-case scenario. Much like those on motorcycles, cyclists have a higher fatality rate when it comes to crashing. For instance, since 2007, in Britain, potholes alone have killed at least 22 cyclists and seriously injured another 368.

The Potential Damage Doesn’t Stop There Either

Of course, worker injuries and vehicular damage aren’t the only costs to consider when facing abrasion and erosion damage. You also have productivity, equipment, and structural loss to worry about.

For instance, workers operating forklifts on an uneven surface are likely to drive more slowly to avoid tipping over, reducing worksite productivity. And if they don’t? You’ll likely be paying to repair or replace that forklift and any items it happened to be carrying.

Using fully automated equipment won’t do much to overcome this obstacle on its own either as an uneven surface can prevent it from operating properly.

And what about structures? With enough abrasion and erosion, owners will have to close down for repairs and replace large sections of concrete structures, from floors all the way to hydro dams. All of which is extremely costly to any business and doesn’t endear owners to the concrete they used.

But Your Concrete Slab Doesn’t Have to Be a Maintenance Liability

You just need an effective concrete hardening solution.

Your first thought might be to use conventional surface-applied concrete hardeners like dry shake hardeners or liquid hardeners. However, those come with a number of setbacks.

Dry shake hardeners, for one, come with a complex application process. It’s not a one-and-done deal. Instead, a worksite team has to prepare the worksite first. That means removing excess concrete and preparing the remaining concrete. Then, depending on your chosen hardener’s material, you may have to take an extra step and use a wood bull float and then a machine float. After that, the team can finally move on to actually applying the dry shake hardener, which will cover a couple millimeters of the concrete’s surface.

However, even that part isn’t without complications. Dry shake hardeners can only be applied during a specific time and type of weather. Pick the wrong time and you can end up with delaminated concrete or an inability to even apply the dry shake.

At the same time, this hardener makes use of a toxic material known as silica dust, which means a worksite team needs to meet the proper safety measures to keep workers safe and comply with legal restrictions.

On the other hand, while not as frustrating to apply or as hazardous as dry shake hardeners, liquid hardeners are often misrepresented. They were first sold as dust reducers to help with defective concrete slabs that had a dusty surface. But now, they’re expected to harden concrete, which they do very poorly.

(For more reasons and data on why these aren’t effective solutions and more, take a look at our e-book on the topic!)

So, what can you use instead?

pply Hard-Cem to Increase Your Concrete Slab’s Resistance to Wear and Tear

Unlike any other concrete hardener on the market, Hard-Cem is an integral hardener. That means it applies its hardening properties throughout a concrete mix to form one solid abrasion- and erosion-resistant material. Essentially, it’s an admixture that you add into the concrete mix during batching. At that time, the admixture will permeate the entirety of the mix, giving it a harder concrete paste and reducing fine and coarse aggregate exposure. It does all this to help the concrete effectively resist abrasion and erosion.

Your Concrete Slab Will Gain Many Other Benefits as Well

More specifically, when using Hard-Cem, you’ll double the wear life of your concrete.  Because it does last that long and can resist abrasion and erosion, Hard-Cem-treated concrete comes with fewer maintenance fees. So you won’t need to resurface or replace your concrete as often. And you won’t need to use as much cement. That can increase your savings on carbon emissions by as much as 40%!

In some cases, this has even helped construction teams earn LEED certifications.

All you need to do to get these advantages is to throw the admixture and its dissoluble bag into the concrete mix during batching. There are no extra application steps, toxic silica dust, or inefficiencies to worry about. So you don’t have to spend money or time on hiring extra labor or managing application errors. Hard-Cem does all the heavy lifting, giving your mix the thorough durability it needs as soon as it’s added.

Hard-Cem also offers incredible versatility. It can work for a variety of projects and help harden horizontal, vertical, and inclined concrete. And it is the only hardener capable of being used for air-entrained concrete.

In short, it increases your concrete’s durability, speeds up your construction, reduces application costs, provides universal compatibility for different concrete mixes, and makes it all more sustainable.

It Just Takes the Right Concrete Mix Ingredients

With Hard-Cem added into your concrete mix, your concrete slabs will be an asset to your project. They’ll need less maintenance over the years, help you reduce your carbon emissions, and most importantly, keep abrasion and erosion at bay to keep your concrete structures standing for as long as possible.

The post Convert Your Concrete Slab from a Maintenance Liability to an Asset appeared first on Kryton.

Did you miss our previous article…
https://www.concretestyle.net/?p=1288

While it doesn’t look like silica dust is going away anytime soon, you may want to consider using an alternative material for your worksite when possible. After all, regulations in the United States of America (USA) are starting to get tighter. And it’s possible those restrictions will become the norm for other countries too.

In fact, just last year, the USA’s Occupational Safety and Health Administration (OSHA) launched a national emphasis program on the material. It’s an initiative that’s meant to restrict silica dust exposure due to the risk it can pose for workers in a number of industries. As a result, you can now expect more inspections on your management of the material. And if your management doesn’t follow the updated regulations, you could face monetary penalties from $5,000 up to $70,000.

Not long after these restrictions were implemented, the inspector general for the U.S. Department of Labor argued for stricter standards for silica dust management in mines. Those included making use of more frequent silica sampling protocols and issuing citations and fines for excess silica dust exposures.

Similar plans for stricter regulations were approved in 2019 in Australia. The hope was to limit the silica dust exposure that stonemasons in the country experience. While regulations were tightened to a degree, they weren’t tightened as much as planned as there was concern over giving businesses enough time to meet the new compliance requirements.

But why is there such resistance? What makes silica dust so appealing and concerning at the same time? Is there no way around this infamous construction material?

To get a better understanding of the situation, we’ll take a deep dive on the subject. Join us as we delve into why silica dust is popular, what makes it dangerous, and how you can minimize its usage.

Hard to Avoid, Silica Dust Comes from a Number of Helpful Construction Materials

Whether we like it or not, silica dust comes from a very common mineral. Known just as silica, this mineral is found throughout the earth’s crust. It can come in two different forms: crystalline and noncrystalline silica. That first form is the one we often call silica dust. And it comes in a form of its own known as quartz. It too is also easily found throughout the world as it’s a basic component in sand, gravel, clay, granite, and various rocks.

As you can probably already tell, that means silica dust can be pretty hard to avoid. It’s in a lot of basic construction materials:

ConcreteCementMortarTilesBricksRock- and stone-based asphaltBlasting abrasives

All of which are often the building blocks to a wide variety of construction projects. They help construction workers create buildings, warehouses, and many other structures.

In some cases, silica dust can even be found in products that are meant to help protect structures. That includes surface-applied concrete hardening products like dry shake hardeners.

It’s what makes it so difficult to avoid silica dust. It’s part of our essential building materials, helping to make it possible to construct projects in the first place.

But Its Help Can Come at a Serious Cost

So long as people don’t create dust with those materials, they’re fine. The crystalline silica just remains within the material, harmless to people nearby. In return, people can safely reside within durable concrete buildings, stand on nice cool tiles in their bathroom, and so on.

However, that’s not often the case during the construction of those structures.

It May Be Stable When Left Alone, but Once Agitated, It Becomes a Problem

Construction activities of all kinds can often kick up dust. These include, but are not limited to, the following:

ChippingSawingDrillingDemolitionAbrasive blastingTunnelingExcavating

Once those activities do start up and move some dust around, there’s a problem. That’s when it’s possible for crystalline silica to become dangerous and interact in ways it shouldn’t with our health.

That Makes It a Health Risk for Anyone Nearby

Essentially, as soon as silica dust is in the air, there’s a risk for people nearby to inhale it. Why a risk? Well, silica dust is a known carcinogen, meaning it can cause cancer in people. More specifically, silica dust is known to spur on the development of lung cancer. And that isn’t the only disease it can lead to. It can also cause people to develop kidney disease and chronic obstructive pulmonary disease.

After inhaling silica dust, people may even develop silicosis, which is particularly dangerous as there is no test for it. You can’t even easily define the signs of silicosis. Its symptoms match many other diseases after all. And you can’t recover from it either.

However, silicosis only tends to occur after you’ve been exposed to silica dust for 10–20 years. That may seem like a more manageable risk level to you. But keep in mind that if your exposure is intense enough, you could develop silicosis after 5–10 years or even after just a few months of exposure. And that’s only for this one particular disease!

In fact, it doesn’t take much silica dust at all to be a threat, whether you’re exposed to it over the years or within a day. That’s why OSHA limits a person’s permissible exposure level to silica dust to 50 μg/m3 over an eight-hour day.

Many Try to Mitigate the Damage of Silica Dust

Despite its risk, silica dust is still necessary for certain areas in construction. That’s why construction sectors and work safety organizations around the world take silica dust safety seriously. As a result, they typically apply the following safety measures and more to manage the application of the material in a responsible way that’s designed to keep construction workers and the overall worksite as safe as possible.

Part of That Includes the Use of Engineering Controls

These measures are designed to eliminate hazards like silica dust before workers come into contact with them. It’s what makes them more favorable than other measures like administrative controls and personal protective equipment (PPE). However, that’s also what can make them a bit more costly at the start. In the end, though, these controls are always good to have in the long run. While initially costly, over time, they’ll reduce operating costs for construction teams and keep them safe and healthy at the same time.

So, how does this work for silica dust?

There are a number of engineering controls that can be used against silica dust. These include the following:

Dust suppression — To prevent as much dust as possible from stirring at all, workers might choose to use water sprays. These might be sprays that can be attached to a tool like a pneumatic, hydraulic, or gas-powered saw. Or they might be sprays that form a curtain of water to protect a specific area from airborne dust particles. In either case, the idea behind it is that once dust particles come into contact with water droplets, they become heavier and are less likely to float in the air and pose a threat to workers.

Ventilation — When workers are agitating silica dust, they can use local exhaust ventilation to suck the dust away before it reaches their breathing area. For instance, if they are using hand-held cut-off saws to cut concrete, they can connect an exhaust hood (also known as a shroud) to the tool first. The hood is connected to an industrial vacuum cleaner with a flexible hose, which allows it to produce enough suction to capture the silica dust.

Industrial vacuum cleaning — Much like with portable ventilation, workers can suck dust away from areas through high-efficiency particulate air (HEPA) filtering vacuums. There are a variety of HEPA vacuums to choose from, including stationary, intermittent-filtering, and continuous-filtering models. So the efficiency of dust suppression with this method will depend. Though, workers should use one that has oversized filters. That allows the vacuum’s filtration system to collect a lot of dust and debris for a longer period than a vacuum with smaller filters.

dministrative Controls Also Come into Play

While not as favorable compared to engineering controls, administrative controls can be combined with them for extra protection. Under these particular controls, a construction team will determine the right work procedures that allow workers to do their job well and safely.

According to the Canadian Centre for Occupational Health and Safety, that can include implementing the following practices:

Worksite education — Without proper knowledge of silica dust, workers could have an increased risk to getting hurt while working near the material. To prevent that, it’s important all workers know what silica dust is, why it’s a threat, and how they can reduce that threat to a manageable level.

An exposure control plan — On top of worksite education, a construction team should have an exposure control plan. That ensures they will have a handy reference at their disposal that outlines the proper directions and expectations for preventing silica dust exposure.

Proper washing facilities on-site — To keep silica dust from spreading too far from the worksite, workers need to make sure they aren’t heading home in a cloud of the material. That might sound a little tricky, but all this requires is proper washing facilities at the worksite. These should provide clean water, soap, and individual towels. That way, each worker has the opportunity to effectively remove any dust around them.

nd for Extra Good Measure, Workers Have PPE

Similar to administrative controls, PPE is more effective when combined with engineering and administrative controls.

But this all depends on the equipment used! Some may find it easier to whip out a disposable dust mask and wear it. As the National Precast Concrete Association notes, it’s likely to be less hot to wear and easier to talk through than respirators approved by official safety authorities like the National Institute for Occupational Safety and Health (NIOSH). And with the word dust in that name, it sounds like it might protect workers from silica dust, right?

Well, unfortunately, that’s just not the case. Disposable dust masks are not NIOSH-approved. And they aren’t meant to really protect people from toxic substances. They’re actually better used as a way to stay comfortable while mowing grass or sweeping or dusting an area.

That’s why you want to go with an officially recognized and approved respirator. It’s designed to protect the wearer from all sorts of airborne contaminants, such as hazardous dusts, fumes, vapors, and gases.

On top of that, workers should also wear overalls and gloves to protect the rest of their body from coming into contact with silica dust. It also makes it easier for them to leave the dust at the worksite as they can simply strip off that uniform, leave it for cleaning on-site, and go home in their non-dusty attire.

But There Are Also Substitutes for Silica Dust to Minimize or Eliminate Its Use

You don’t always need to deal with silica dust or with as much of it as you might think. In fact, there are some great silica dust-free alternatives that you can use to keep your worksite just that much safer.

For a Silica Dust-Free, Non-Toxic Concrete Hardener, Look to Hard-Cem

It may be more conventional to harden your concrete with products like dry shake hardeners. But those often come with silica dust.

Luckily, you can eliminate this concern entirely when you use Hard-Cem. It’s free of silica dust. And as the only integral hardening admixture on the market, Hard-Cem has the unique ability to enter a concrete mix directly. Because of that, you don’t need to hire extra labor to apply it or have to worry about it not covering your concrete completely. You just add its dissoluble bag into the concrete mix during batching and let it permeate throughout the concrete. That gives the concrete full-depth hardening and increases its resistance to abrasion and erosion.

In return, you get concrete with double the usual wear life and a much more durable surface. That allows you to minimize the number of repairs or replacements you otherwise might need, which also reduces how much carbon your project emits.

There Are Also Many Other Substitutes for Different Applications

Of course, silica dust doesn’t just help with concrete hardening at times. It also helps with many other construction activities. So what can you substitute silica dust with for those?

While that may not be possible for every activity, you can substitute silica dust in the following activities:

Abrasive blasting — OSHA lists a number of silica dust substitutes for abrasive blasting materials. These include aluminum oxide, baking soda, coal slag, copper slag, and corn cob granules.

 

Precision grinding — The Workers Health & Safety Centre in Ontario, Canada, notes that grinding (also known as abrasive cutting) in construction can be done without silica dust. Instead of using sandstone grinding wheels, workers can use aluminum oxide wheels.

Silica Dust Doesn’t Have to Be a Problem at Your Worksite

It may feel like it’s everywhere (and in some cases, it certainly can be!). But you don’t have to put up with silica dust all the time. There are ways to not only mitigate its potential for damage but to also remove it entirely. Whether you choose to harden your concrete through Hard-Cem or use other alternatives, you can minimize the silica dust at your worksite, keeping workers safer and your worksite just as, if not more, productive.

The post Silica Dust: The Dangers and How You Can Mitigate Them appeared first on Kryton.